TCS Consultants, Inc. - RF (Radio Frequency) Test and Measurement for Wireless Systems

Last Updated: June 29, 2007

Home Contact Quote Request Mailing List FAQ Employment

Services

RF Path Surveys

RF Exposure (EME/EMP)

Products

Software

Effective Radiated Pwr

Samples

Contact TCS

Internal Use

FCC ASR Registrations

FCC TowAir

Anritsu SiteMasters		Sample DTF
	TCS Consultants, Inc. uses Anritsu SiteMaster products for test and measurement of transmission line systems and antenna systems. These units are capable of testing transmission systems without turning off transmitters from far end locations. All SiteMaster products are acquired by TCS Consultants, Inc. with the optional power meter functions, which allow for accurate measurements of receive signals for antenna alignment and interference issues.
Electrical Conduction & Resisitivity Testing		Sample Return Loss
	TCS Consultants, Inc. provides ground resistance testing and resistivity (conductivity) testing on new, existing, and proposed electrical ground systems. TCS Consultants, Inc. uses AEMC clamp-on ground testers for testing existing electrical ground systems for resistance. These testers ensure proper bonds for exothermic and pressure connections. Direct Reading of ground resistance from 0.01W to 1200W Direct reading of continuity and ground loop resistance; Direct reading of ground leakage current from 1mA to 30Arms; Ability to measure up to 1.25" diameter cable and rods; Quickly and accurately measure grounds with no auxiliary rods or spacing requirements; No requirement to disconnect neutral service; Perform multi-grounded systems without disconnecting the ground under test; Measure leakage current flowing to ground or circulating in ground loops; Measure ground rod and small grid resistance.
Spectrum Testing and Field Verification		Signal Analyzer
	TCS Consultants, Inc. Provides spectrum testing and signal measurement for both interference studies and pre-coordination studies. TCS uses the most advance equipment such as HP spectrum analyzers to ensure accurate and precise measurements. TCS can perform spread spectrum pre-testing for 900 Mhz, 2.4 Ghz, 5.2 Ghz and 5.8 Ghz systems. This spectrum testing ensures that the frequencies are available before expensive investment in transceivers and transmission equipment.